Saddled horse can be an easy process once learned. Doing this helps right ensures more comfort for the horse and rider and importantly, security while riding. The acquisition of good quality horse Tack your local tack shop will greatly assist in this process. Here are six easy steps in saddle your horse.
1. Prepare your horse to receive the saddle.
Start by tying your horse securely to a pole ring stall or trailer. Using a fast exit node or ring of metal tie can help if your horse is frightened or feels the need to withdraw. Then use a good quality supply as horse grooming brushes, curry combs and takes up to clean and remove any dirt, mud, or wood chips horses coat and feet. Pay special attention to cleaning your horse's back and stomach. This will ensure that the saddle and emissions do not cause skin irritation, when placed on the horse.
2. Inspect your saddle and saddle blanket.
Sure your saddle and saddle pad is clean and in good running order. Remove any dirt or debris filling (or fleece) in the saddle. Also cleaning your saddle pad or blanket will comfort your horse and help prevent wounds or bruises from the seat. Inspect your saddle for all missing pieces (like Conchos, stirrup hobble straps, metal D-rings, screws, etc.)
3. Place your saddle blanket on the horse.
Place your saddle pad or blanket on the horse's back. I want to put a little in front and on the withers of the horse to start, then hand her a little behind where is seems to be centered. Make sure hair horsehair or decay are not tangled or be shot under the pad.
4. Place the saddle on the saddle cloth and the horse.
Position yourself with the seat being held by both hands on either side of your horse. I love my saddle horses on either side of them. I'm still selling the same side in May because horse become one way. I think it is good as riding the horse on each side. I like my horses to feel comfortable when I'm on each side of them. I therefore rests on the saddle my hip, then use a swinging and lifting motion, I raised the saddle to the horse's back. Center saddle on the saddle cloth. Make sure your saddle pad extends at least one inch in front and back of your saddle. Then, lift the front Your saddle pad up and away from the horse's withers. Again, make sure that the hair or mane wilt not tangle or be from the pad or saddle. I like to keep away from the horse and visually see if the saddle is level lying on his back. Another way to check for the placement of the saddle is correct to ensure you have a hand in width of the distance between the elbow of the horse and the front cinch. Place the front cinch too close or alongside his elbow can cause pinching or excessive pressure of the saddle on his shoulders.
5. Secure your seat on the horse.
When I'm not using my saddle, I want to tie my straps, Latigo and neck breast on top of my stool. I usually leave the bound on the top of my saddle, even when I'm going to lift and put my saddle on the horse. After placing the saddle, so I resolve these items and let them hang around the bottom of the saddle. I always start by securing the front cinch. Be careful when you reach under your horse to enter the lower straps (front or rear) the lower left or the horse. I recommend standing next to his left leg before facing backwards, then using your left arm to reach in the horse. This enables you to watch his back foot if he decides to kick or jump. I wire Latigo (front leather strap on the saddle) from the front cinch loop several times. Pull the Latigo / cinch until the saddle does not slip from side to side. Use either a "T" node cross or use the language of the pre-lock loop to cinch the girth. If you use a cinch back, make sure the front and back aches are related to a strap binding. I want to leave about an inch space between the strap back and belly of horses when I completed and locked up the cinch. Having the back strap too loose may allow a horse to get his hind legs tangled in IT and have May get too tight to be uncomfortable.
6. Relax your horse and do the final inspection.
I found my relaxing horse walking around it for a few minutes helps to ensure a good fit and well curved saddle. I will usually tip the saddle from side to side while he was still on the ground to ensure it is safe and it will stay in place when I wake up in the saddle. I find I am generally tighten the front cinch a little more before getting in the saddle. The end of your Latigo should now be inserted into his guard. All loops must be locked and secured.
AA Callisters has been selling Western Wear, Cowboy Boots, Western/English Tack, and Cowboy Hats for over 50 years. They are Utah’s leading Western Retailer with 2 store locations as well as their online store. Visit their blog for free and useful information or their online store for a great selection of western products.
“Blender”-Dirt Jump, Freeride and Downhill Freerider 2 Track
